NX-450

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 21/03/2013
  • ID: faqh00000686_000

For better results when sewing stretch fabrics

To achieve better results when sewing your project with stretch fabrics, refer to the following tips.

  • To avoid skipped stitches, use ball point needle (golden colored) 90/14 when sewing on stretch fabrics.

  • Use thread for knits or a stretch stitch.

  • First, baste the pieces of fabric together, and then sew without stretching the fabric.

    fig001

    (1) Basting


  • Place thin paper or stabilizer material under the fabric and sew it together with the fabric.
    * When you have finished sewing, tear off any excess paper.

    fig002

    (2) Stabilizer material or thin paper


  • Decrease the pressure of the presser foot. (It is applied to models equipped with the function to adjust the presser foot pressure)

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

BC-2500, CS-6000/6000b/6000t, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 200/200QE, Innov-is 210, Innov-is 400, Innov-is 4000D/4000, Innov-is 410, Innov-is 600, Innov-is 610, Innov-is 6750D, Innov-is 900, Innov-is 950, Innov-is BQ3100, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, Innov-is VQ2400, Innov-is VQ3000, NS10, NS15, NS25, NS30/30LE, NS35, NS55, NX-200/200QE, NX-250, NX-400Q/400, NX-450, NX-600, QC-1000, QC-2000

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit