MFC-J1300DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Scan to an Editable Text File Using OCR

Your machine can convert characters in a scanned document to text using optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application.
  • The Scan to OCR feature is available for certain languages.
  • Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software.

  1. Load your document.
  2. Press [Scan]>[to PC]>[to OCR].
  3. If the machine is connected over the network, press or to display the computer where you want to send data, and then press the computer name.

    If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK].

  4. Do one of the following:
    • To change the settings, press [Options] or [Set at Device].
    • Press [Start] to start scanning without changing additional settings.

      The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

    To use the [Options] or [Set at Device] setting, a computer with either ControlCenter4 (Windows®) or Brother iPrint&Scan (Mac) software installed must be connected to the machine.

  5. Select the scan settings you want to change, and then press [OK].
    Option
    Description
    Scan Type

    Select the scan type for your document.

    Resolution

    Select the scan resolution for your document.

    File Type

    Select the file format for your document.

    Document Size

    Select your document size.

    Brightness

    Select the brightness level.

    Contrast

    Select the contrast level.

    ADF Auto Deskew

    (Available only for certain models)

    Correct any skewed documents when they are scanned using the ADF.

    Skip Blank Page

    When On is selected, blank pages are skipped.

    Remove Background Colour

    Change the amount of background colour that is removed.

    • To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to make this a One Touch Shortcut. Follow the LCD instructions.
  6. Press [Start].
    The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J1100DW, MFC-J1300DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.