DCP-7055

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 12/06/2012
  • ID: faq00002490_009

No Paper

Case 1: The machine is out of paper or paper is not properly loaded in the paper tray.

Do one of the following:

  • Refill the paper in the paper tray and press Black (Mono) Start or Color (Colour) Start or Start.

  • Remove the paper and load it again. Then press Black (Mono) Start or Color (Colour) Start or Start.

  • If the problem is not resolved, the paper pick-up roller may need to be cleaned. Clean the paper pick-up roller.
    (Click here to see the details of how to clean the paper pick-up roller.)



Case 2: The paper tray indicated on the LCD is not installed properly.

  • Re-install the paper tray that is indicated on the LCD.



Case 3: The paper you are using may not meet our specifications.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7055, DCP-7065DN, DCP-9055CDN, FAX-2840, MFC-7360N, MFC-7860DW, MFC-8510DN, MFC-8910DW, MFC-8950DW, MFC-9120CN, MFC-9320CW, MFC-9460CDN, MFC-9970CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit