Model discontinued. This page is no longer updated.

MFC-9180

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 24/08/2006
  • ID: faq00000299_000

How do I program the date and time?

To set the date and time, follow the instructions listed below:


  1. Press the Menu/Set key on the Control Panel.
  2. Press the up or down navigation key and select General Setup,  then Date/Time.
  3. The LCD screen will prompt you to enter the year. Enter the last two digits of the year (for example, enter 03 for 2003).
  4. Press the Menu/Set key.
  5. The screen will prompt you to enter the month. Enter the two digits for the month (for example, enter 09 for September).
  6. Press the Menu/Set key.
  7. The screen will prompt you to enter the day. Enter two digits for the day (for example, 06).
  8. Press the Menu/Set key.
  9. The screen will prompt you to enter the time. Enter the time in 24-hour format (for example, enter 15:00 for 3:00 pm).
  10. Press the Menu/Set key.
  11. Press the Stop/Exit key on the Control Panel.

The LCD will display the date and time whenever the unit is idle.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FAX-2850, MFC-3100C, MFC-4800, MFC-5100C, MFC-5200C, MFC-9160, MFC-9180

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit