HL-L9310CDW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 13/10/2022
  • ID: faq00000027_506

Print the Network Configuration Report

The Network Configuration Report lists the network configuration, including the network print server settings.
  • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
  • If the [IP Address] on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again.
  • You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC Address on the report, for example:
    • IP address: 192.168.0.5
    • Subnet mask: 255.255.255.0
    • Node name: BRN000ca0000499
    • MAC Address: 00-0c-a0-00-04-99

HL-L8260CDN/HL-L8260CDW

  1. Press or to select the [Print Reports] option, and then press OK.
  2. Press or to select [Network Config]. Press OK.
    The machine prints the Network Configuration Report.

HL-L8360CDW/HL-L9310CDW

  1. Press [Settings]>[All Settings]>[Print Reports]>[Network Configuration].
  2. Press [Yes].
    The machine prints the Network Configuration Report.
  3. Press .

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L8260CDW, HL-L8360CDW, HL-L9310CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit