TD-2130N

FAQs & Troubleshooting

FAQs & Troubleshooting

When I print many continuous labels, part of the label data is printed twice.

Part of the label data can be printed twice if the printer has not received data for a long period of time (e.g. a roll runs out during printing, but the printer remains powered-on for a long time before the roll is replaced with a new one.)

 

To avoid this, follow the steps below:

 

  1. Open the printer properties dialog box.

  2. Open the [Ports] tab and click the [Configure Port...] button. 
    Properties

  3. If the "LPR Byte Counting Enabled" check box is checked, uncheck it, and then click the [OK] button.
    Port Monitor

If you reach the end of the roll and there is unprinted label data, the last label printed on the replaced roll will be printed again onto the newly inserted one.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-9800PCN, QL-720NW, QL-800, QL-820NWB, RJ-4030, RJ-4040, TD-2120N, TD-2130N, TD-4410D, TD-4420DN, TD-4550DNWB

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.