PT-E850TKW

FAQs & Troubleshooting

FAQs & Troubleshooting

How to use Auto Power-Off Time

You can specify the auto power-off time in 2 ways.
Also, you can specify the setting for each case of using the AC adapter and using the Li-ion battery.

 

Using the Printer Setting Tool (For all models)

For Windows:
Use the Device Settings in the Printer Setting Tool on your computer.
For starting the Printer Setting Tool, refer to the FAQ:  “Using the Printer Setting Tool"
For using the Device Settings, refer to the FAQ:  “Using the Device Settings (for Windows)"

 

For Mac OS X (D800W / E800W only):
Use the Printer Setting Tool on your computer.
For using the Printer Setting Tool, refer to the FAQ:  “Using the Printer Setting Tool (for Mac)"

 

Using your printer’s keyboard (For models equipped with the keyboard)

  1. Select [Settings] in the Home screen using the Up arrow , Down arrow , Left arrow or Right arrow key, and then press the OK or Enter key.

     

  2. Select [Auto Power Off] using the Up arrow or Down arrow key, and then press the OK or Enter key.

     

  3. Select [AC Adapter] or [Li-ion Battery] using the Up arrow or Down arrow key and set the value using the Left arrow or Right arrow key.

     

  4. Press the OK key.

 

Available settings:

Setting Value Setting Value
AC Adapter Off (None) Li-ion Battery Off (None)
10 min 10 min
20 min 20 min
30 min 30 min
40 min 40 min
50 min 50 min
1 h 1 h
2 h  
4 h
8 h
12 h

 

  • If you connect the AC adapter to the printer after you specified "Auto Power Off", the machine uses the "AC Adapter" setting.
  • The default value is "1 h" for the AC adapter and "30 min" for the Li-ion battery.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-E850TKW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.