PT-D200KT
 |
FAQs & Troubleshooting |
I want my printer to use less tape for each label.
Due to the construction of the tape mechanism, there is no way to print without excess tape before the first label.
However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.
The following methods are useful for reducing tape use:
1. When printing a single label
2. When printing multiple labels
1. When printing a single label
-
Press the [Label] key (
/ 
) or the [Menu] key ( 
/ 
). -
Press the [Cursor] key (
/ 
) until [Margin] is displayed. -
Press the [OK] key (
). -
Press the [Cursor] key ( / ) until [Narrow] is displayed.
-
Press the [OK] key ( ).
2. When printing multiple labels
To reduce the margin size of the second and subsequent labels, print multiple labels consecutively using either the same or different layout for the labels.
Using the same layout for multiple labels
To feed the tape correctly, the printer will automatically set a wider left margin for the first label only. The second and subsequent labels will have narrow margins.
-
Press the [Label] key ( / ) or the [Menu] key ( / /
/ 
). -
Press the [Cursor] key ( / ) until [Margin] is displayed.
-
Press the [OK] key ( ).
-
Press the [Cursor] key ( / ) until [Chain Print] is displayed.
-
Press the [OK] key ( ).
- Enter the text.
-
Press the [Print] key (
/ 
/ 
/ 
). [Copies:] is appears. Press the [Cursor] key ( / ) to select your desired number of copies. (1 - 9) -
Press the [Print] key ( / / / ).
-
When the message [Feed OK?] appears after the last label is printed, be sure to press the [OK] key ( ).
When [Chain Print] is set, feed the tape before using the cutter otherwise a part of the text may be cut off.
Be sure to feed the tape before cutting the tape. - After the tape is fed, press the cutter lever to cut off the chain of labels.
Using different layouts for multiple labels
To feed the tape correctly, the printer will automatically set a wider left margin for the first label only. The second and subsequent labels will have narrow margins.
-
Press the [Label] key ( / ) or the [Menu] key ( / / / ).
-
Press the [Cursor] key ( / ) until [Margin] is displayed.
-
Press the [OK] key ( ).
-
Press the [Cursor] key ( / ) until [Chain Print] is displayed.
-
Press the [OK] key ( ).
- Enter text.
-
Press the [Print] key ( / / / ). [Copies:] is appears. Press the [Cursor] key ( / ) to select your desired number of copies. (1 - 9)
-
Press the [OK] key ( ). The message [Feed OK?] appears.
-
Press the [Escape] key (
) to edit the next label.
- Clear the text, enter the text for the next label.
-
Repeat step f to j until all labels have been created, and then press the [Print] key ( / / / ).
-
When the message [Feed OK?] appears after the last label is printed, be sure to press the [OK] key ( ).
When [Chain Print] is set, feed the tape before using the cutter otherwise a part of the text may be cut off.
Be sure to feed the tape before cutting the tape.
-
After the tape is fed, press the cutter lever to cut off the chain of labels.
