Let's take a look at how to wind the bobbin and set the lower thread.

• Only use the plastic bobbin that comes with this machine or bobbins of the same type.

Let's take a look at how to pass the upper thread into the machine and thread the needle.

• Make sure to raise the needle using the needle position button before upper threading.

Let's start sewing to use the straight stitch.

In the latter part of the movie, it shows you how to use the presser foot locking pin (black button on the left side) of zigzag foot "J".

Let's try reverse sewing.

In the latter part of the movie, it shows you how to sew using the automatic reverse/reinforcement stitching function.

Let's take a look at how to adjust the stitch length and width.

(The adjustment screen of the stitch width and stitch length varies depending on the language.)

Let's check the thread tension.

• Before starting your sewing project, we recommend sewing trial stitches using thread and a piece of fabric that are the same as those used for your project. While checking the sewing results, adjust the thread tension.

Let's take a look at how to replacing the presser foot.

• Use the appropriate presser foot for the type of stitch that you wish to sew.
  For details on the presser foot that should be used with the selected stitch, refer to "Stitch Chart" on the operational manual.
• Use the embroidery foot when doing embroidery.

Let's take a look at the basic steps for embroidering.

• Use the embroidery foot when doing embroidery.

Let's try selecting embroidery pattern or fonts, and performing various editing function for embroidery.

Let's try creating combinations of embroidery pattern, character pattern, frame pattern or other patterns.

Let’s take a look at how to change the needle and maintenance.