CM550DX/ CM550
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
The material being cut catches on the tip of the cutting blade.
Possible Causes (or Results)
Case1 : Dust or lint has accumulated in the holder.
Case2 : The blade is worn.
Case3 : The material being cut is incompatible with this machine.
Solutions
----- Case1 -----
Clean the holder.
>> For details, see “Cleaning the holder”.
![img](/g/b/img/faqend/faqh00000700_000/my/en/34277/faqh700_fig0001.gif)
----- Case2 -----
Replace the blade with a new one.
>> For details, see “Replacing the blade”.
----- Case3 -----
Replace the material with one compatible with this machine.
>> For details, see “Preparation of craft paper / fabric”.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
CM550DX/ CM550
Content Feedback
To help us improve our support, please provide your feedback below.