Innov-is NV880E

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 07/10/2016
  • ID: faqh00000632_002

How do I remove or attach the presser foot ?

  • Only use presser feet designed specifically for this machine. Use of any other presser foot may result in injuries or damage to the machine.
  1. Press image (Needle position button) once or twice to raise the needle.
  2. Press image.
    image
    • When the message “OK to automatically lower the presser foot? ” appears on the LCD screen, press "OK" to continue.
    • The screen changes, and all keys and operation buttons are locked (except image ).
  3. Raise the presser foot lever.
    image (1) Presser foot lever

     

  4. Use the included screwdriver to loosen the embroidery foot screw, and then remove the embroidery foot.
    image (1) Screwdriver

    (2) Embroidery foot

    (3) Embroidery foot screw

     

  5. Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the embroidery foot screw.

    image
     

     

  6. Slowly lower the presser foot lever.

    image

     

  7. Raise the presser foot lever to check that the embroidery foot is securely attached.

     

  8. Press image  to unlock all keys and buttons.
    image
     

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is NV800E, Innov-is NV880E

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit