DCP-J100

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 16/04/2013
  • ID: faq00003059_000

After replacing an ink cartridge, "No Ink Cartridge" or "Cannot Detect" is shown and I cannot print.

If a replacement ink cartridge is not installed correctly, this problem may occur.


Follow the steps below to reinstall the ink cartridge:


  1. Hold the ink cartridge vertically so that the label is toward the left side of the machine and insert the cartridge.

    image

  2. Push the back of the ink cartridge marked "PUSH" until it clicks and the lock release lever lifts.

    image

    Brother strongly recommends that you do not refill the ink cartridges provided with your machine. We also strongly recommend that you continue to use onlyGenuine Brother Brand replacement ink cartridges. Use or attempted use of potentially incompatible ink and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our warranty coverage does not apply to any problem that is caused by the use of unauthorized third party ink and/or cartridges. To protect your investment and obtain premium performance from the Brother machine, we strongly recommend the use of genuine Brother supplies.
    > Brother Genuine Supplies information



If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J100, DCP-J105, MFC-J200, MFC-J2310, MFC-J2320, MFC-J2330DW, MFC-J2510, MFC-J2720, MFC-J2730DW, MFC-J3520, MFC-J3530DW, MFC-J3720, MFC-J3930DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit