MFC-490CW

FAQs & Troubleshooting

FAQs & Troubleshooting

When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display.

There can be several causes for this issue:

  • The machine is sending or receiving a fax.
  • The machine is operating a function.
  • The machine has some type of error.
  • PC-FAX receive software is active.

To solve this issue, please follow the steps below:

  1. Click Finish to close the error message "RS 005-xx" or "RS 006-xx" on the display.
  2. Do the following:
    • If the machine is sending or receiving a fax, wait until the job is completed.
    • If the machine is operating a function, press the Stop key on the control panel of the machine to exit the menu.
    • If the machine has some type of error, clear the error.
    • If PC-FAX receive software is active, close it.
  3. Run Remote Setup again. Remote Setup should now operate correctly.

If the issue continues, please contact Brother Customer Service from "Contact Us ".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-540CN, DCP-6690CW, FAX-2840, MFC-240C, MFC-3240C, MFC-3360C, MFC-410CN, MFC-425CN, MFC-440CN, MFC-4800, MFC-490CW, MFC-5460CN, MFC-5840CN, MFC-5860CN, MFC-5890CN, MFC-620CN, MFC-640CW, MFC-6490CW, MFC-665CW, MFC-6890CDW, MFC-7220, MFC-7340, MFC-7360, MFC-7420, MFC-7820N, MFC-7840N, MFC-7840W, MFC-7860DW, MFC-795CW, MFC-8220, MFC-8380DN, MFC-8440, MFC-8460N, MFC-8510DN, MFC-8820D, MFC-8840D, MFC-885CW, MFC-8860DN, MFC-8880DN, MFC-8910DW, MFC-9120CN, MFC-9320CW, MFC-9420CN, MFC-9440CN, MFC-9450CDN, MFC-9840CDW, MFC-9970CDW, MFC-J2310, MFC-J2510, MFC-J5910DW, MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J6910DW, MFC-J825DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.