Model discontinued. This page is no longer updated.

FAX-727

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 18/12/2008
  • ID: faq00000544_001

How can I clear the "Check Document " error message?

This error can occur if the document being sent or copied is not inserted properly, fed incorrectly or is too long. Follow the troubleshooting steps and recommendations listed below:
  1. Remove any paper that is not jammed from the ADF.
  2. Open the top cover by lifting the lever on the right side of the top cover.
  3. Pull the original toward the front of your fax machine.
  4. Close the top cover. Press down on both sides of the top cover until it clicks.

Before placing the document(s) in the Automatic Document Feeder (ADF), verify the error message "CHECK DOCUMENT" no longer is displayed on the LCD. If the error message continues to appear on the display, unplug the unit for 30 seconds and then plug it back in.

 

If the error message still continues to be displayed on the LCD, call Brother Customer Service.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FAX-717, FAX-727, FAX-737MC

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit