The driver installation finished successfully but I cannot print. (Linux®)

Do the following (this example shows the QL-720NW):

  1. Open "http://localhost:631/printers" in your browser.
  2. Select the target printer and click it.
  3. Check the "connection" item.

    If "usb usb:/dev/usb/lp0" or another printer name is displayed, reconfigure the printer as described below. If your printer is network-connected, reconfigure it regardless of the contents of the connection item. Depending on the Linux® distribution or version, the procedures or descriptions may differ.

 

For USB connection
For network connection
 

For USB connection

  1. Connect the printer to the computer via USB and turn them on.
  2. Select [Modify Printer] from the [Administration] menu.
  3. Select the target printer from [Local Printer].
  4. Select the options you want, and then click [Continue] to confirm your selection.
    Modify Printer
     
    Modify Printer
     
  5. Click [Modify Printer].
    Modify Printer
     

For network connection

  1. Connect the printer to the network and turn it on.
  2. Select [Modify Printer] from the [Administration] menu.
  3. A list of connected printers appears. Select the target printer from [Discovered Network Printers].
  4. Multiple identical printers may be listed depending on the supported network protocols. In that case, list them in descending order.
  5. If the printer is not listed, select [Internet Printing protocol (http)], click [Continue], and then enter http://xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of the printer) on the displayed page.
  6. Select the options you want, and then click [Continue] to confirm your selection.
    Modify Printer
     
    Modify Printer
     
  7. Click [Modify Printer].
    Modify Printer
     
  8. Try to print again.
  9. If you cannot print, repeat the steps from step 2, and then select a different printer in step 3.
    If you cannot print with any of the listed printers, after selecting [Internet Printing protocol (http)], enter the IP address manually.

    We recommend using a fixed IP address, not the IP address acquired from the DHCP.

질문의 대답이 없는 경우 다른 FAQ를 확인했습니까?

설명서를 확인했습니까?

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?

2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.