CM700
 |
FAQ 및 문제 해결 |
There are deep cuts completely through the mat.
Possible Causes (or Results)
Case1 : The blade extension from the blade holder is too much.
Case2 : The cutting pressure (“Cut Pressure”) is incorrect.
Solutions
----- Case1 -----
Remove the holder from the carriage, and then adjust the blade extension.
(1) Turn to the left to decrease the blade extension.
(2) Turn to the right to increase the blade extension.
>> For details, see “Adjusting the Blade Extension”.
----- Case2 -----
Adjust the setting for “Cut Pressure” in the settings screen.
>> For details, see “Adjusting the Blade Extension”.
>> For details, see “Settings for Specific Functions”.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.
