MFC-L5700DW

FAQ 및 문제 해결

FAQ 및 문제 해결
  • 날짜:29/08/2023
  • ID:faq00100800_000

My printer takes a long time to start printing when using Airprint. (iOS 16)

Try one of the following methods to enable IPv6:

 

> Using Web Based Management

> Using the Touchscreen (Touchpanel models)

> Using the Touchscreen (1 Line LCD models)

 

 

Using Web Based Management

  1. Print the Network Configuration report.
    > Click here to see how to print the Network Configuration Report.
  2. On a computer that's connected to the same network as your machine, open a web browser.
  3. Type the IP address listed on the Network Configuration report into your browser's address bar, and then press Enter.
    The machine's web interface will open. (For example: http://192.168.1.105)
  4. Click Network > Wired or Wireless > IPv6 (Wired) or IPv6 (Wireless).
    step4
  5. Select Enabled, and then click submit.
    step5

 

Using the Touchscreen (Touchpanel models)

  1. Press the Settings menu.
  2. Press Network.
  3. Select Wired LAN or WLAN.
  4. Select TCP/IP.
  5. Press ▲ or ▼ to select IPv6.
  6. Select On.
  7. Turn the machine off and then on again.

 

Using the Touchscreen (1 Line LCD models)

  1. Press ▲ or ▼ to select Settings.
  2. Press ▲ or ▼ to select Network.
  3. Select Wired LAN or WLAN and press OK.
  4. Press ▲ or ▼ to select TCP/IP and press OK.
  5. Press ▲ or ▼ to select IPv6 and press OK.
  6. Press ▲ or ▼ to select On and press OK.
  7. Turn the machine off and then on again.

 

질문의 대답이 없는 경우 다른 FAQ를 확인했습니까?

설명서를 확인했습니까?

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?

2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.

전송