HL-5450DN
![]() |
FAQ 및 문제 해결 |
Fuser Error or Self-Diagnostic
- The temperature of the fuser unit does not rise to a specified temperature within the specified time.
- The fuser unit is too hot.
Please follow the steps below to solve the problem:
- Turn the machine's power switch off, wait a few seconds, and then turn it on again.
- Leave the machine for 15 minutes with the power on.
- If the error still remains, please contact Brother Customer Service from "Contact Us" or call your dealer and report the error status, Fuser Error or Self-Diagnostic.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.