The paper is skewed when it's printed.

There are various causes for paper skew.
Please check the following points to avoid the skew:


Set the document correctly (only applicable for Copy or fax)
Please make sure you set the document in the ADF (Automatic Document Feeder) and adjust the paper guides to fit the width of your documents or on the scanner glass without a skew.


Load the paper correctly in the paper tray
Please make sure you load the paper in the paper tray correctly. Adjust the paper guides to fit the width of the paper you are using.

 

Check the paper specification
Please make sure you are using the paper which meets the required specification. For details, please refer to the User's Guide. The latest User's Guide is available in the Manuals section.

 

Check the paper size setting of the printer driver
Please make sure the correct paper size is selected in the printer driver to match the paper you are using.


NOTE:The steps may differ depending on the operating system being used.

  1. Cilck Start => Settings => Printers and Faxes=> Right click on the printer icon for your machine and select Printer Preferences.
  2. Click Basic tab and check the setting  for Paper Size.



Clean the paper feed rollers or pads
Click here to see the Related FAQs for the details of cleaning.

 

 

질문의 대답이 없는 경우 다른 FAQ를 확인했습니까?

설명서를 확인했습니까?

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?

2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.