MFC-L5700DN

FAQ 및 문제 해결

FAQ 및 문제 해결

Paper is Jammed in the 2-sided Tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps:
  1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
  2. Pull the paper tray completely out of the machine.
  3. At the back of the machine, pull the 2‑sided tray completely out of the machine.
  4. Pull the jammed paper out of the machine or out of the 2‑sided tray.
  5. Remove paper that may have jammed under the machine due to static electricity.
  6. If paper is not caught inside the 2-sided tray, open the back cover.
    WARNING
    HOT SURFACE

    The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

  7. Use both hands to gently pull the jammed paper out of the back of the machine.
  8. Close the back cover until it locks in the closed position.
  9. Put the 2-sided tray firmly back in the rear of the machine.
  10. Put the paper tray firmly back in the front of the machine.

질문의 대답이 없는 경우 다른 FAQ를 확인했습니까?

설명서를 확인했습니까?

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

관련 모델

MFC-L5700DN, MFC-L5700DW, MFC-L5755DW, MFC-L6900DW

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?

2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.