HL-L9430CDN

FAQ 및 문제 해결

FAQ 및 문제 해결

Paper is Jammed in the Back of the Machine

If the machine's control panel or the Status Monitor indicates that there is a jam in the back of the machine (Jam Rear), do the following:

image

This procedure intentionally includes the opening and closing procedure of all related parts to paper jams in the back of the machine. Depending on the condition of the paper jam, the machine will inform you on the LCD which parts need to be opened in order to clear the paper jam.

Follow the instruction shown on the LCD to clear the paper jam.

  1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
  2. Open the back cover.
    image
  3. Pull the tabs labeled "1" at the left and right sides towards you to release the fuser cover.
    image
    WARNING
    HOT SURFACE

    The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

    image
  4. Use both hands to gently pull the jammed paper out of the machine.
    image
  5. Pull the tabs labeled "2" at the left and right sides towards you to release the Rear Cover 2 (available only for certain models).
    image
    WARNING
    HOT SURFACE

    The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

    image
  6. Use both hands to gently pull the jammed paper out of the machine. (for certain models only)
    image
  7. Close the cover 2. Make sure the tabs labeled "2" at the left and right sides lock into place (available only for certain models).
    image
  8. Close the fuser cover. Make sure the tabs labeled "1" at the left and right sides lock into place.
    image
  9. Close the back cover until it locks in the closed position.

질문의 대답이 없는 경우 다른 FAQ를 확인했습니까?

설명서를 확인했습니까?

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

관련 모델

HL-L9430CDN

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?

2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.