MFC-T910DW
 |
FAQ 및 문제 해결 |
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
- The timer will restart if any operation is carried out on the machine, such as receiving a fax or a print job.
- The factory setting is five minutes.
- When the machine goes into Sleep Mode, the LCD backlight turns off.
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
- Press Menu.
- Press
or 
to select the following: - Select [General Setup]. Press OK.
- Select [Ecology]. Press OK.
- Select [Sleep Mode]. Press OK.
- Select [1 Min], [2 Mins], [3 Mins], [5 Mins], [10 Mins], [30 Mins], or [60 Mins]. Press OK.
- Press Stop/Exit.
MFC-T910DW
- Press Settings.
- Press or to select the following:
- Select [General Setup]. Press OK.
- Select [Sleep Mode]. Press OK.
- Select [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]. Press OK.
- Press Stop/Exit.
내용 피드백
지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.
