Reset the network settings to the factory default.

Follow the steps below to reset the network settings back to its default factory settings (resetting all information such as the password and IP address information).


This function restores all wired and wireless network settings to the factory default.

  1. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

  2. Press Menu.

  3. Press the Up or Down arrow key to choose Network and press OK.

  4. Press the Up or Down arrow key to choose Network Reset and press OK.

  5. - For MFC Users:
    Press 1 for Reset.

    - For DCP Users:
    Press the Up arrow key for Reset.

  6. - For MFC Users:
    Press 1 for Reboot.

    - For DCP Users:
    Press the Up arrow key for Reboot.

  7. The machine will restart, re-connect cables once this is complete.

질문의 대답이 없는 경우 다른 FAQ를 확인했습니까?

설명서를 확인했습니까?

도움이 더 필요한 경우 Brother 고객 서비스에 문의하십시오.

내용 피드백

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.

1단계: 이 페이지의 정보가 얼마나 도움이 됩니까?

2단계: 추가할 의견이 있습니까?

이 양식은 피드백용으로만 사용됩니다.