HL-1240

FAQ 및 문제 해결

Print on envelopes.

Do not use any of the following types of envelopes, as they will cause paper feed problems:

Envelopes that are damaged, curled, wrinkled, or irregularly shaped
Envelopes that are extremely shiny or highly textured
Envelopes with clasps, snaps or tie strings
Envelopes with self-adhesive closures
Envelopes of baggy construction
Envelopes that are not sharply creased
Embossed envelopes
Envelopes that were previously printed by a laser printer
Envelopes that are pre-printed on the inside
Envelopes that cannot be arranged uniformly when placed in a pile
Envelopes constructed with paper that exceeds the paper weight specifications for the printer
Poorly manufactured envelopes with edges that are not straight or consistently square
Envelopes with transparent windows, holes, cutouts or perforations.

Before printing envelopes, you must fan the stack of envelopes well to avoid paper jams and misfeeds.

Do not load different types of paper at the same time in the paper cassette because paper jams and misfeeds may occur.
Do not print on envelopes using 2-Sided(Duplex) printing.
For correct printing, you must select the same paper size from within your software application as the paper in the tray.
If your application software does not support paper size selection in its print menu, you can change the paper size on the printer's control panel under the PAPER menu.

Use the manual feed slot on the front of the printer for the best results.

Select manual feed mode in the printer driver.
Lift up the rear cover at the rear of the printer.
Send the print data.
Set the width of the manual feed paper guides to the paper width you need. Insert the envelope FACE UP into the manual feed slot with both hands until the front edge of the paper is picked up by the rollers.
Close of the rear of the printer when the print job is complete.

A "NO PAPER" message is shown in the Status Monitor until you insert a sheet of paper into the manual feed slot.

지원을 개선하는 데 도움이 되도록 아래에 피드백을 제공하십시오.