Model discontinued. This page is no longer updated.

HL-1430

FAQs & Troubleshooting

FAQs & Troubleshooting

I cannot install the Windows 7 built-in drivers from the Windows Update provided by Microsoft®.

If you get an error like the following, please check the following points.

Error

Error
  • Internet Connection:
    The Windows Update requires an Internet connection. Please make sure that your computer is connected to the Internet.

  • Device Installation Settings:
    Follow the steps below to check the setting.
    1. Click Start => Control Panel => System and Security => System.
    2. Click Advanced system settings.
      System

    3. Click Hardware tab and Device Installation Settings.
      System Properties

    4. Make sure that the option "Yes, do this automatically (recommended)" is selected.
      - If the option "Yes, ... " is selected, click Cancel to close the Device Installation Settings dialog, and then click Cancel to close the System Properties dialog.

      - If not, please select the option "Yes, ... " and click Save Changes to save the setting, and then click OK to close the System Properties dialog.
      Device Installation Settings

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-110C, DCP-8020, DCP-8025D, DCP-8040, DCP-8045D, FAX-1820C, FAX-1840C, HL-1240, HL-1250, HL-1270N, HL-1430, HL-1440, HL-1450, HL-2460, HL-5040, HL-5050, HL-5070N, HL-5140, HL-5150D, HL-5170DN, MFC-210C, MFC-3220C, MFC-3240C, MFC-3420C, MFC-3820CN, MFC-410CN, MFC-5440CN, MFC-5840CN, MFC-620CN, MFC-8440, MFC-8820D, MFC-8840D, MFC-8840DN, MFC-9660

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.