[LED indication]

Meaning of the LED Indication:

• Connecting (One-push WLAN Setup)

  One-push WLAN setup is in progress.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Stopping Ejecting

  The machine has stopped ejecting the document or the Plastic Card. To continue ejecting, press .

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Remote Setup

  Remote Setup is in progress. To cancel Remote Setup, click Cancel in the Remote Setup window on your computer.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• All Blank Page Skipped

  All scanned pages were skipped as blank pages.

  > Click here to see how to solve the issue.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Replace Pad

  Replace the Separation Pad with a new one.

  > Click here to see how to replace the Separation Pad.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Replace Roller

  Replace the Pick-up Roller with a new one.

  > Click here to see how to replace the Pick-up Roller.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Replace Parts

  Replace the Separation Pad and the Pick-up Roller with a new one.

  > Click here to see how to replace the Separation Pad.

  > Click here to see how to replace the Pick-up Roller.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• USB cable is not connected (Scan to PC)

  Network Disconnected (Scan to Net Device1/Net Device 2)

  Press and then follow the steps applicable for your case.

  • If you use the Scan to PC function:

    Connect the machine and your computer with a USB cable.

  • If you use the Scan to Net Device 1/Net Device 2:

    Check the following and then try again.

    • The WLAN is enabled.
    • The network settings are correct.
    • Your wireless access point/router is turned on.

     

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Front Cover is Open

  Close the Front Cover of the machine.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Document Jam

  Clear the document jam.

  > Click here to how to clear the document jam.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Plastic Card Jam

  Pull the plastic card out from the machine.

  > Click here to see how to pull the plastic cards.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Top Cover is Open

  Close the Top Cover. Do not open the Top Cover while a plastic card is inserted into the Card Slot.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Plastic Card Inserted

  Pull the plastic card out from the machine. Do not insert a plastic card into the Card Slot while the Top Cover is open.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• USB Flash Drive is Full (Scan to USB)

  Your machine cannot save to a USB flash drive if the USB flash drive is full.

  > Click here to see how to delete unused files or folders.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Rename the File (Scan to USB)

  The maximum sequential number for the file name has been reached.

  > Click here to see how to delete unused files or change the file name.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Unusable Device (Scan to USB)

  An unsupported USB device is inserted in the USB Direct interface.

  > Click here to see how to remove the unsupported USB device from the USB Direct interface.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• USB Hub Not Supported (Scan to USB)

  A hub or USB flash drive with a hub is inserted in the USB Direct Interface.

  > Click here to see how to remove the unsupported device from the USB Direct interface.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Authenticate Error (Scan to FTP)

  A server authentication error occurred because the FTP user name and password you entered are incorrect or not configured correctly.

  Confirm that the user name and password are configured or entered correctly.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Server Time Out (Scan to FTP)

  Cannot Scan documents using the Scan to FTP function because the Server Time Out error occurs.

  > Click here to see how to solve the issue.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Sending Error (Scan to FTP)

  Cannot scan documents using the Scan to FTP function because the Sending Error (Scan to FTP) error occurs.

  > Click here to see how to clear the issue.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• Out of Memory (Scan to USB)

  Out of Memory (Scan to FTP)

  Out of Memory (Scan to PC)

  Out of Memory (WS Scan)

  The machine's memory is full and the machine cannot scan the entire document.

  > Click here to how to decrease the scanner resolution or reduce the number of the documents.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• One-push WLAN Setup Error

  The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled. To configure your wireless settings using WPS or AOSS™, you must operate both your machine and the wireless access point/router. Confirm your wireless access point/router supports WPS or AOSS™, and try setup again. If you do not know how to operate your wireless access point/router using WPS or AOSS™, see the documentation provided with your wireless access point/router, ask the manufacturer of your wireless access point/router, or ask your network administrator.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• One-push WLAN Setup Error

  One-push WLAN setup failed. Turn the machine off and on, and then try setup again.

Back to the examples of LED indication >>

[LED indication]

Meaning of the LED Indication:

• One-push WLAN Setup Error

  Two or more wireless access points that have WPS or AOSS™, enabled are detected. Do one of the following:

  • Confirm that only one wireless access point/router within range has the WPS or AOSS™ method active and try setup again.
     
  • Try setup again after a few minutes in order to avoid interference from other access points.

Back to the examples of LED indication >>