MFC-L2701DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Scan and save a document in PDF format using the SCAN key on my Brother machine (Scan to File)

You can scan and save a document in PDF format to a preferred folder by pressing the SCAN key on the control panel of your Brother machine.

If you want to scan multiple pages into one file, refer to FAQ, "Scan multiple pages into one file instead of each scan being saved as a separate file".
Follow the instructions below to configure and use the Scan to File feature.

NOTE: Illustrations shown below are from a representative product and operating system and may differ from your Brother machine and operating system.

 

 

STEP A: Configure the Scan to File feature

 

For Windows
  1. Open the ControlCenter.
    • Brother Utilities supported models
      1. Open Brother Utilities.
        • Windows 7 / 10 / 11
          Click Start or Start(Start) > (All Programs or All apps >) Brother > Brother Utilities.
        • Windows 8
          On the Start screen, click Start.
          If  is not  on the Start screen, right-click somewhere on an empty spot, and then click, All Apps from the bar.
          Click Brother Utilities.
      2. Select Scan.
      3. Click ControlCenter4.
    • Brother Utilities unsupported models
      Click Start(Start) > All Programs > Brother > [model name] > ControlCenter4.
  2. Open Device Scan Settings window.

    In Home Mode:
    Click Device Settings tab > Device Scan Settings.
     
    Device Scan Settings in Home Mode

     

    In Advanced Mode:
    Click Device Settings tab > Device Scan Settings.
     
    Device Scan Settings in Advanced Mode

     

  3. The Device Scan Settings window will appear. Click the File tab and select PDF(*.pdf) in File Type. Configure the settings and click OK. For example, you can set the prefix text used for the file name of the scanned data in the File Name box. You can also set the folder to save the scanned data in the Destination Folder box.
     
    The Device Scan Settings window

     

  4. Go to STEP B.

 

For Macintosh

This step is available until macOS 10.14.
If you use macOS 10.15 or later, you must install Brother iPrint&Scan and iPrint&Scan Push Scan Tool.
> Click here to download Brother iPrint&Scan and iPrint&Scan Push Scan Tool in the Downloads section.

 

After install the iPrint&Scan Push Scan Tool, you must configure your Brother machine's scan button settings from the Brother iPrint&Scan.

  1. Open the ControlCenter.
    To open the ControlCenter2 application, click Go from the Finder bar, Applications > Brother > ControlCenter. Double click the ControlCenter.
    The ControlCenter will open and an icon will be placed in the dock.
  2. Hold the Ctrl key on your keyboard and click on File.
  3. Click the Device Button tab and select PDF(*.pdf) in File Type. Configure the settings and click OK. For example, you can set the prefix text used for the file name of the scanned data in the File Name box. You can also set the folder to save the scanned data in the Destination Folder.
    CC2_DeviceButton

 

 

 

STEP B: Use the Scan to File feature from the SCAN key on my Brother machine

  1. Load your document.
  2. Press Scan(SCAN).
  3. Press the Up or Down arrow key to select Scan to PC, and then press OK.
  4. Press the Up or Down arrow key to select File, and then press OK.
  5. If the machine is connected over the network, select the destination computer.
  6. Press OK.

    If the LCD prompts you to enter a PIN, enter the four-digit PIN for the destination computer on the LCD.

  7. Do one of the following:

     

    • To change the scan settings, press the Up or Down arrow key to select Yes, and then press OK. Go to Step 8.
    • To use the default scan settings, press the Up or Down arrow key to select No, and then press OK. Press Start.
      The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
      • (For some models only)
        You cannot change the scan settings from the machine's control panel.
      • In order to change scan settings, Brother's Control Center software must be installed on a computer connected to the machine.
  8. Select the scan settings you want to change:
     
    • Scan Type
    • Resolution
    • File Type
    • Scan Size
    • Remove Bkg. Clr
      (available only for the Color and Gray options.)
      (For some models only)
      Scan type depends on the settings of the Device Scan Settings screen of ControlCenter4 or Device Button tab of the ControlCenter2 configuration screen.
  9. Press Start.
    The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to complete the scanning job.

You can scan from your computer with the useful application as ControlCenter.
> Refer to related FAQ's about how to use the ControlCenter with Windows/ Macintosh.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-1511, DCP-1601, DCP-1616NW, DCP-L2520D, DCP-L2540DW, DCP-L2541DW, MFC-1811, MFC-1911NW, MFC-L2701D, MFC-L2701DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.