Model discontinued. This page is no longer updated.

MFC-440CN

FAQs & Troubleshooting

FAQs & Troubleshooting

I cannot feed the paper from the Photo Paper Tray.

Please make sure that you are using the photo paper tray correctly following the steps below:


Step1 : Loading photo paper


In Canada the photo bypass tray is called the photo paper tray.



Use the photo bypass tray, which has been assembled on the top of the output paper tray cover, to print on photo 4" x 6" and photo L 3.5" x 5" size paper. When you use the photo bypass tray, you do not have to take out the paper that is in the tray beneath it.



  1. Press the photo bypass tray release button with your left thumb and push the photo bypass tray backward until it clicks into the photo printing position.


    Paper Tray


  2. Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.


    Paper Tray


  3. Put the photo paper into the photo bypass tray and gently adjust the paper side guides to the paper.
    Make sure the paper side guides touch the sides of the paper.


    Paper Tray



    • Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

    • Always make sure that the paper is not curled.


  4. When you have finished printing photos return the photo bypass tray to the normal printing position.Press the photo bypass tray release button with your left thumb and pull the photo bypass tray forward until it clicks.



    Paper Tray





Next, please try cleaning the paper pick-up roller.



Step2 : Cleaning the paper pick-up roller


  1. Pull the paper tray completely out of the machine.


  2. Unplug the machine from the AC power outlet and remove the Jam Clear Cover (1).


    Remove Cover


    DO NOT place the jam clear cover face down as shown in the illustration. You may damage the cover and cause paper jam.


    Cover



  3. Clean the Paper Pick-up Roller (1) with isopropyl alcohol on a cotton swab.


    Clean Roller


  4. Put the Jam Clear Cover back on. Make sure the cover is set properly.


    Tray


  5. Re-connect the power cord.


  6. Put the paper tray firmly back in the machine.


If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-330C, MFC-440CN, MFC-665CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.