HL-2250DN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 25/04/2013
  • ID: faq00000572_002

Print a list of the internal fonts.

Please follow steps either using the control panel button or the printer driver:


Using the control panel button:

  1. Turn off the printer.
  2. Make sure that the front cover is closed and the power cord is plugged in.
  3. Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Error LEDs light up. Release the Go button. Make sure that the Toner, Drum and Error LEDs are off.
  4. Press the Go button twice. The printer will print a list of the internal fonts.

Using the printer driver (Only for Windows users) :

If you are using Brother's Windows printer driver, you can print a list of the internal fonts as follows:

  1. Open the "Printing Preferences" dialogue.
    Please refer to the instructions, "Change the printer driver settings (For Windows)".

    • If your printer driver doesn't have Support tab, go to step 3.
    • If your printer driver has Support tab, go to step 2.

  2. For users whose printer driver has Support tab:
    Click Support tab and then Print Fonts button.
    Basic Tab - Print Fonts
  3. For users whose printer driver doesn't have Support tab:
    1. Click Basic tab and then Support button.
      Basic Tab - Support button
    2. Click Print Fonts button.
      Print Fonts

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2150N, HL-2170W, HL-2250DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit