DCP-T520W

FAQs & Troubleshooting

FAQs & Troubleshooting

Reset Your Machine

IMPORTANT
(MFC-T920DW/MFC-T925DW)

When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not lose any important messages.

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menu.
  2. Press image or image to make your selections:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select the reset option you want to use. Press OK.
  3. Press image for [Reset] to confirm.
  4. Press image for [Yes] to reboot the machine.
    The machine restarts.

MFC-T920DW/MFC-T925DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select the reset option you want to use. Press OK.
  3. Press image for two seconds to confirm.
    The machine restarts.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T520W, DCP-T525W, DCP-T820DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.