HL-7050
![]() |
FAQs & Troubleshooting |
"JAM C" error appears on the LCD. What should I do?
|
If a paper jam occurs at paper exit, follow these steps:
- Open the top cover of the printer.
![](/g/b/img/faqend/faq00000161_003/in/en/4618/OPEN_CVR2.gif)
- Slowly pull the jammed paper from the paper exit with both hands.
![](/g/b/img/faqend/faq00000161_003/in/en/4619/JAM_EXIT1.gif)
- Close the top cover of the printer.
If a paper jam occurs behind the face up output tray before the paper exits, remove the jammed paper as follows:
- Open the top cover of the printer.
If a duplex unit is installed on the printer, remove it from the printer. After removing the jammed paper, re-install the duplex unit onto the printer.
![](/g/b/img/faqend/faq00000161_003/in/en/4621/OPEN_CVR3.gif)
- Open the face up output tray.
![](/g/b/img/faqend/faq00000161_003/in/en/4620/open_rear_cvr1.gif)
- Slowly remove the jammed paper with both hands.
![](/g/b/img/faqend/faq00000161_003/in/en/4622/jam_rear3.gif)
- Close the face up output tray.
- Close the top cover of the printer.
![](/g/b/img/faqend/faq00000161_003/in/en/4623/close_cvr1.gif)
Content Feedback
To help us improve our support, please provide your feedback below.