HL-1211W

FAQs & Troubleshooting

FAQs & Troubleshooting

Reset the network settings to the factory default

You can use your machine's On/Off button to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
 

  • You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3, or Web Based Management.
 
  1. Make sure the power cord is plugged in, the top cover is closed and the machine is turned off.
             
  2. While holding down Power On/Off(Power On/Off), open and close the top cover.
                 
  3. Release Power On/Off(Power On/Off). Make sure that all the LEDs turn off.
                  
  4. Press Power On/Off(Power On/Off) six times.
    The machine will restart.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1211W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.