MFC-9120CN

FAQs & Troubleshooting

FAQs & Troubleshooting

The toner does not fix to paper well. (Poor fixing)

Poor fixing

Please check the following points:

Step 1:

  1. Check that you use the paper that meets our specification.
    Please refer to "What is the recommended paper?".

  2. Check that the drum units and toner cartridges are installed properly.
    Please refer to the instructions, "How do I replace a drum unit?" and "How do I replace the toner cartridge?".
    If you still have a print quality problem, please go to the Step 2.

Step 2:

  1. Make sure that two gray levers inside the back cover, one on the left-hand side and one on the right-hand side, are in the up position.

    The two gray levers are in the up position.

  2. Make sure that the media type settings in the printer driver and in the machine's Paper Type menu matches the type of paper you are using.

  3. Choose Improve Toner Fixing mode in the printer driver as follows.
    If this selection does not provide enough improvement, select Thicker paper in Media Type settings.

    NOTE: Illustrations shown below may vary depending on your Operating System (OS).

    For Windows printer driver:
    1. Open the Printing Preferences dialog box and click Advanced tab.
    2. Click on Other Print Options.
    3. Select "Improve Print Output" for Printer Function and select "Improve Toner Fixing" for Improve Print Output.
      Click on OK.
      Other Print Options


    For Windows BR-Script printer driver:
    1. Open the Printing Preferences dialog box and click on Advanced.
    2. Select "Improve Toner Fixing" for Improve Print Output.
      Click on OK.
      Improve Print Output


    For Macintosh printer driver:
    1. Open Print dialog. (Click here to see the details of how to open Print dialog.)
    2. Click Advanced tab in the Print Settings list.
    3. Click on Improve Print Output.
      Improve Print Output 
    4. Select "Improve Toner Fixing" for Improve Print Output.
      Click on OK.
      Improve Print Output

    For Macintosh BR-Script printer driver:
    [ Mac OS X 10.3.9 or 10.4 ]
    1. Open Print dialog. (Click here to see the details of how to open Print dialog.)
    2. Select "Set 3" for Feature Sets in the Printer Features list.
    3. Select "Improve Toner Fixing" for Improve Print Output.
      Improve Print Output


    [ Mac OS X 10.5 or later users ]
    1. Open Print dialog. (Click here to see the details of how to open Print dialog.)
    2. Select "General 2" for Feature Sets in the Printer Features list.
    3. Select "Improve Toner Fixing" for Improve Print Output.
      Improve Print Output

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-9010CN, MFC-9010CN, MFC-9120CN, MFC-9320CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.