Drum End Soon

The Drum End Soon message appears when the drum unit will need to be replaced soon. When the Drum End Soon message appears, the following LED indications is shown on the control panel. The Error LED (Error) will blink 3 times at 0.5 second intervals and the Ready LED (Ready) will light up. Then both LEDs will turn off for 1 second.

 

DrumEndSoon

 

Even with the Drum End Soon message on the status monitor, you can still continue to print. You can replace the drum unit when you feel the print quality is no longer acceptable or when the status monitor displays Replace Drum.

 

However, it is a good idea to have a new drum unit and have it ready for when the Replace Drum status is indicated.

 

> For the order number (Order No.) of the drum unit, please click here to see the Consumables & Options page.

 

The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge.

 

> Click here to see information for the difference between the toner cartridge and the drum unit.

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1110, HL-1201, HL-1211W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.