PT-E550W

FAQs & Troubleshooting

FAQs & Troubleshooting

Installing a CA certificate

You can install a CA certificate into your printer using the following method.

Installing a CA certificate using EWS (Embedded Web Server)

  1. Make sure the printer and your computer are connected via Wi-Fi®.
  2. Start your web browser.
  3. Type "http://machine's IP address/" in the browser's address bar (where "machine's IP address" is the machine's IP address).
        E.g. http://192.168.1.2/
  4. Enter the password, and then press Right arrow button (Right arrow button).

    You may be asked for the default login password depending on your model.
    The default login password is preceded by "Pwd" and located either on the bottom of the printer or in the battery or media compartment.


    For more information, see [IMPORTANT – Network Security Notice: Default Login Password Change] on the [Manuals] page.

  5. Click Network.
  6. Click Security.
  7. Click CA Certificate.
    Embedded Web Server
  8. Click Import CA Certificate.
  9. Select the CA certificate you want to install and import.

    Setting a password:
     We recommend changing a login password to prevent unauthorized access to EWS.

    1. Click Administrator.
    2. Type the password you want to use (up to 32 characters).
    3. Re-type the password in the Confirm new password box.
    4. Click Submit.
      The next time you access EWS, enter a password in the Login box, and then click .
      After configuring the settings, logout by clicking .

    You can also set a password by clicking Please configure the password. on the printer’s web page if you are not setting a login password.

 

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-E550W, PT-P750W, QL-1110NWB, QL-820NWB, RJ-3150, TD-2130N, TD-2135N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.