DCP-T820DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Set the Machine to Power Off Automatically

The Auto Power Off feature can reduce power consumption. Set the amount of time that the machine must be in Sleep Mode before it automatically powers off. When this feature is set to [Off], you must power off the machine manually.

To turn on the machine after the Auto Power Off feature has turned it Off, press image.

image

The machine does not power off automatically when:

  • Fax jobs are stored in the machine's memory. (MFC-T920DW/MFC-T925DW)
  • An error prevents the Fax Journal report from printing. (MFC-T920DW/MFC-T925DW)
  • The machine is connected to a telephone line. (MFC-T920DW/MFC-T925DW)
  • The machine is connected to a wired network. (DCP-T820DW/DCP-T825DW/MFC-T920DW/MFC-T925DW)
  • The machine is connected to a wireless network.
  • [WLAN Enable] is set to [On] or [WLAN(Wi-Fi)] is selected in the [Network I/F] setting.

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menu.
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. Select [Ecology]. Press OK.
    3. Select [Auto Power Off]. Press OK.
    4. Select [Off], [1 hour], [2 hours], [4 hours], or [8 hours]. Press OK.
  3. Press Stop/Exit.

MFC-T920DW/MFC-T925DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. Select [Auto Power Off]. Press OK.
    3. Select [Off], [1 hour], [2 hours], [4 hours], or [8 hours]. Press OK.
  3. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.