MFC-8380DN

FAQs & Troubleshooting

FAQs & Troubleshooting

Locate files scanned with ControlCenter2 (For Macintosh)

The ControlCenter is used to interface the "Scan to" action keys on the Brother machine with the computer. When you use the Scan to File button, the scanned file is automatically saved in the default Destination Folder. To view the default Destination folder:

 

  1. Open the ControlCenter.
    There may be two different versions of the ControlCenter2 software available depending on your model and operating system. If you are not sure which version you have, try the steps for each version is turn.

     

     

    Current Version

    To open the ControlCenter2 application, click Go from the Finder bar, Applications => Brother => ControlCenter. Double click the ControlCenter.
    The ControlCenter will open and an icon will be placed in the dock.

     

    Icon in the Dock

     

    If you do not see the ControlCenter software, then you may be using the previous version of ControlCenter. For instructions on how to use this version, refer to Previous Version.
     
    Previous Version

    To open the ControlCenter2 application, click Go from the Finder bar, Applications => Brother => ControlCenter.app or Macintosh HD => Library => Printers => Brother => Utilities => ControlCenter => ControlCenter. app.
    Double click the ControlCenter.app.
    The ControlCenter will open and an icon will be placed at the top of right of the screen near the system time. In the future you may click on this icon and select Open to launch the application.

     

    Icon in the menu bar

     

    • If you do not see the ControlCenter software, then you may be using the current version of ControlCenter. For instructions on how to use this version, refer to Current Version.
       
    • If you do not have either version, then the scanner driver and ControlCenter software is not installed properly.
      > Click here to download the scanner driver in the Downloads section.
       
    • If your hard drive icon (Macintosh HD icon) is not on the desktop:
      1. Click Finder => Preferences....
      2. In the General tab, check "Hard disks" in the "Show these items on the desktop:"
      3. Close the Finder Preferences window.
        Your hard drive icons will appear on the desktop.
     
  2. Click on Configuration => Scan => File.
     

    Image

     

  3. The "Scan to File" configuration window will appear.
     
  4. Click the Device Button Tab for scanning from the Brother machine's SCAN key or the Software Button Tab for scanning from within the ControlCenter software application.
     

    Image

     

  5. The Destination Folder field will display the default destination for all files scanned with the Scan to File button. You will need to open this folder to view scanned documents.
     
  6. To change the default Destination Folder, click BROWSE and select the location you want to save your files and click OK. All subsequent scans using the Scan to File button will be saved in this location.
     

    Image

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-145C, DCP-165C, DCP-185C, DCP-385C, DCP-585CW, DCP-6690CW, DCP-7030, DCP-7040, DCP-J125, MFC-250C, MFC-290C, MFC-3360C, MFC-490CW, MFC-6490CW, MFC-6890CDW, MFC-7320, MFC-7340, MFC-790CW, MFC-8380DN, MFC-8880DN, MFC-9450CDN, MFC-990CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.