DCP-T220

FAQs & Troubleshooting

FAQs & Troubleshooting

Clean the Paper Feed Rollers

If the paper feed rollers are stained with ink or have a buildup of paper dust, it may cause paper feed problems.
WARNING
imageBe sure to unplug the machine from the electrical socket before cleaning the paper feed rollers to avoid an electrical shock.
  1. Unplug the machine from the electrical socket.
  2. If the paper support flap is open, close it, and then close the paper support.
  3. Pull the paper tray (1) completely out of the machine.
    image
  4. Clean the front and back sides of the Paper Feed Rollers (1) with a soft lint-free cloth moistened with water, using a side-to-side motion. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
    image
  5. Slowly push the paper tray completely into the machine.
  6. Reconnect the power cord.
    image
    Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may cause paper feed problems.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T220, DCP-T420W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.