DCP-T520W

FAQs & Troubleshooting

FAQs & Troubleshooting

Print the Network Configuration Report

The Network Configuration Report lists the network configuration, including the network print server settings.
image
  • Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "BRNxxxxxxxxxxxx" for a wired network or "BRWxxxxxxxxxxxx" for a wireless network (where "xxxxxxxxxxxx" is your machine's MAC Address / Ethernet Address.)
  • If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again.
  • You can find your machine's settings, such as the IP address, subnet mask, node name, and MAC Address on the report, for example:
    • IP address: 192.168.0.5
    • Subnet mask: 255.255.255.0
    • Node name: BRN000ca0000499
    • MAC Address: 00-0c-a0-00-04-99

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menu.
  2. Press image or image to select the [Print Reports] option. Press OK.
  3. Press image or image to select the [Network Config] option. Press OK.
  4. Press the Mono Start or Colour Start button.
    The machine prints the current Network Configuration Report.

MFC-T920DW/MFC-T925DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [Print Reports]. Press OK.
    2. Select [Network Config]. Press OK.
  3. Press image.
    The machine prints the current Network Configuration Report.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.