RJ-3055WB
|
GYIK és hibaelhárítás |
The print quality is poor.
Check the following:
Is the media loaded correctly?
-
Make sure that both sides of the Media Compartment Cover are fully closed.
-
Install the correct media.
Are dust or adhesive accumulated on the Print Head or Platen Roller?
Clean the Print Head and Platen Roller. For details, see the FAQ: "How to clean the Print Head" or "How to clean the Platen Roller".
Is the print density set correctly?
Adjust the print density and print speed.
Run the printer self-test and check the Print Head test pattern for missing dots. For details, see the FAQ: "How to execute the printer configuration (Self-test) to debug".
If the problem still occurs, contact your reseller or Brother Customer Service for assistance.
Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?
Megnézte a kézikönyvekben?
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.