PT-P300BT
![GYIK és hibaelhárítás GYIK és hibaelhárítás](/g/b/shared/img/module/icon_question_33.png) |
GYIK és hibaelhárítás |
The printed label contains blank horizontal lines.
A horizontal line can be a result of some dust or dirt collecting on the surface of the Print Head. This can be corrected by cleaning.
Cleaning the Print Head:
-
Turn off the printer.
-
Open the battery cover and remove the batteries, or disconnect the AC adapter.
-
Open the cassette cover and remove the tape cassette.
-
Gently wipe up and down along the Print Head using a cotton swab.
![Clean Print Head Clean Print Head](/g/b/img/faqend/faqp00000060_023/eu_ot/en/1171661/mainte.gif)
Do not touch the Print Head with your bare hands. It is so hot that you may get burned.
Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?
Megnézte a kézikönyvekben?
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.