ADS-1600W
|
GYIK és hibaelhárítás |
Cannot start Remote Setup.
Check the following points to solve the issue:
-
Check if the machine is turned on.
If not, turn on the machine and then try again.
-
Check if the machine is connected to your computer.
If not, connect the machine to your computer and then try again.
-
Check if the machine is in Sleep Mode.
If not, press or open the Top Cover, and then try again.
-
Check if an error occurs.
If so, clear all errors and then try again.
-
Check if the machine is scanning documents.
If so, wait until scanning has finished and try again.
-
Check if the machine is in the Settings Menu.
If so, stop configuring the machine from the Control Panel.
Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?
Megnézte a kézikönyvekben?
Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.