A document is jammed. Please open the top cover and remove the jammed paper by pulling it forward, then try again.

Check the following:

 

  1. Open the scanner's top cover and remove the document by pulling it forward.
     
  2. Make sure that no piece of paper remains into the scanner, then close the top cover.
     
  3. Make sure your document is acceptable for the machine.
     

    > Click here to see detail of the acceptable documents.

     

    Use the supplied Carrier Sheet.

     

    > Click here to see how to load the Carrier Sheet.

     

     

Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?

Megnézte a kézikönyvekben?

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.

1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?

2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.