Jam Tray 1 / Jam Tray 2

 

If a paper jam occurs inside the paper tray, follow these steps:

 

  1. Pull the paper tray completely out of the machine.
    For Jam Tray1

    Pull_paper_tray_1
     
    For Jam Tray 2:

    Pull_paper_tray_2
     
  2. Use both hands to slowly pull out the jammed paper.

    Pull_out_jammed_paper
  3. Make sure that the paper is below the maximum paper mark (Maximum Paper Mark) in the paper tray. While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
  4. Put the paper tray firmly back in the machine.

Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?

Megnézte a kézikönyvekben?

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.

1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?

2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.