DCP-T520W
 |
GYIK és hibaelhárítás |
Set the Date and Time
(MFC models)
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to each fax you send by setting your Station ID.
(DCP models)
If the machine's power has been off, the machine's date and time may not be current. Re-enter them.
DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
- Press Menu.
- Press
or 
to make your selections: - Select [Initial Setup]. Press OK.
- Select [Date & Time]. Press OK.
- Select [Date & Time]. Press OK.
- Press or on the control panel to set the last two digits of the year. Press OK. Repeat these steps for setting the month and day.
- Press or on the control panel to set the hour. Press OK. Repeat these steps for setting the minute.
- Press Stop/Exit.
MFC-T920DW/MFC-T925DW
- Press Settings.
- Press or to make your selections:
- Select [Initial Setup]. Press OK.
- Select [Date & Time]. Press OK.
- Select [Date]. Press OK.
- Enter the last two digits of the year using the dial pad, and then press OK.
- Enter the two digits for the month using the dial pad, and then press OK.
- Enter the two digits for the day using the dial pad, and then press OK.
- Press or to select [Time], and then press OK.
- Enter the time (in 24-hour format) using the dial pad, and then press OK.
- Press Stop/Exit.
Tartalommal kapcsolatos visszajelzés
Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.
