A modell megszűnt. Ez az oldal már nem frissül újra.

How do I improve the copy or fax quality?

Please clean the print head and the scanner area inside the unit. Follow the steps listed below:

To clean the print head:

  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.
  2. Open the top cover by lifting the lever on the right side of the top cover.
  3. Take out the print cartridge.

  1. To clean your fax machine's print head, wipe the print head with a lint-free cloth that is dry or lightly moistened with isopropyl alcohol.
  1. Wait until the alcohol on the print head is completely dry.
  2. Install the print cartridge.
  3. Close the top cover. Press down on both sides of the top cover until it clicks.

To clean the scanner area:

  1. Unplug the telephone line and then the power cord.
    When you reconnect these lines later, connect the power cord first, then the telephone line.
  2. Open the top cover by lifting the lever on the right side of the top cover.

  3. Clean the white bar and the glass strip with isopropyl alcohol on a lint-free cloth.

Be careful not to bend the white film or drop anything into the fax machine.

  1. Close the top cover. Press down on both sides of the top cover until you hear it click into place.

Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?

Megnézte a kézikönyvekben?

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.

1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?

2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.