Envelope creases

Envelope creases


Check the following points to solve the problem:

NOTE: Illustrations shown below are from a representative product, and may differ from your Brother machine.

  1. To get the best print quality, we suggest using the recommended paper. Check that you are using paper that meets our specifications. Click here to see details of the recommended paper.

  2. The drum units or toner cartridges may not be installed correctly. Check that the drum units or toner cartridges are installed correctly.


  3. Make sure that the envelope levers inside the back cover are pulled down to the envelope position when you print to the envelope.

    gray levers in the envelope position

Ha kérdésére nem talált választ, megtekintette a további GYIK-eket is?

Megnézte a kézikönyvekben?

Ha további segítségre van szüksége, kérjük, vegye fel a kapcsolatot a Brother ügyfélszolgálatával:

Tartalommal kapcsolatos visszajelzés

Kérjük, segítse munkánkat azzal, hogy visszajelzést küld.

1. lépés: Mennyire volt segítségére az ezen weboldalon kapott információ?

2. lépés: Szeretne még bármilyen megjegyzést hozzáfűzni?

Kérjük, vegye fegyelembe, hogy ezen az űrlapon csak visszajelzéseket várunk.