MFC-7860DW
 |
常見問題&故障排除 |
The driver installation finished successfully but I cannot print. (Linux)
Do the following:
- Open "http://localhost:631/printers" in your browser.
- Select the target printer and click it.
- Check the connection item.
If "usb usb:/dev/usb/lp0" or another printer name is displayed, reconfigure the printer as described below. If your printer is network-connected, reconfigure it regardless of the contents of the connection item. Depending on the Linux distribution or version, the procedures or descriptions may differ.
For USB connection
- Connect the printer to the computer via USB and turn them on.
- Select Modify Printer from the Administration menu.
- Select the target printer from Local Printer.
- Select the options you want, and then click Continue to confirm your selection.
- Click Modify Printer.
For network connection
- Connect the printer to the network and turn it on.
- Select Modify Printer from the Administration menu.
- A list of connected printers appears. Select the target printer from Discovered Network Printers.
- Multiple identical printers may be listed depending on the supported network protocols. In that case, list them in descending order.
- If the printer is not listed, select Internet Printing protocol (http), click Continue, and then enter http://xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of the printer) on the displayed page.
- Select the options you want, and then click Continue to confirm your selection.
- Click Modify Printer.
- Try to print again.
-
If you cannot print, repeat the steps from step 2, and then select a different printer in step 3.
If you cannot print with any of the listed printers, after selecting Internet Printing protocol (http), enter the IP address manually.We recommend using a fixed IP address, not the IP address acquired from the DHCP.
內容意見回饋
請於下方回饋您的意見以幫助我們提升服務的品質
