DCP-T420W

常見問題&故障排除

聯絡我們
產品註冊
瀏覽 www.brother.com.hk

Reset the Network Settings to Factory Settings

You can use the buttons on the control panel to reset your machine to its factory settings. This resets all information, such as the password and IP address.

You can also reset the print server to its factory settings using Web Based Management.

Press WiFi Button/LED and (Stop) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts blinking.
Press and hold Colour Start for two seconds.　
The machine restarts.