2340CV
 |
FAQs & Troubleshooting |
How to attach and remove the presser foot
Always be sure to turn off the power before carrying out this operation.
- Turn off the main power switch or disconnect the electric supply plug.
- Raise the presser foot lever. (1)
- Set the needle to its highest position by turning the hand wheel (2) counter clockwise.
- Push the button on the presser foot holder and the standard foot will be released. (3)
- Raise the presser foot farther by pushing the presser foot lever upward. Then remove the presser foot and store it in a safe location.
- Again, raise the presser foot farther by pushing the presser foot lever upward. Then place a presser foot just under the presser foot holder (A) so that the groove in the bottom of the presser foot holder (B) is aligned and catches the bar on the top of the foot (C). Then lower the presser foot lever to attach the foot. (4)
Content Feedback
To help us improve our support, please provide your feedback below.
